20070201
8-5-10
Command Reference
Goto~Lbl
Function: This command performs an unconditional jump to a specifi ed location.
Syntax: Goto <label name> ~ Lbl <label name>
Parameters: label name: value (0 to 9), variable (A to Z,
r ,
θ
)
Description:
• This command consists of two parts: Goto
n (where n is a parameter as described above)
and Lbl n (where n is the parameter referenced by Goto n ). This command causes program
execution to jump to the Lbl-statement whose n parameter matches that specifi ed by the
Goto-statement.
• This command can be used to loop back to the beginning of a program or to jump to any
location within the program.
• This command can be used in combination with conditional jumps and count jumps.
• If there is no Lbl-statement whose value matches that specifi ed by the Goto-statement, an
error occurs.
To Next Page
Loading...
