20070201
8-5-13
Command Reference
k Display Commands (DISP)
DispF-Tbl, DispR-Tbl
No parameters
Function: These commands display numeric tables.
Description:
• These commands generate numeric tables during program execution in accordance with
conditions defi ned within the program.
• DispF-Tbl generates a function table, while DispR-Tbl generates a recursion table.
DrawDyna
No parameters
Function: This command executes a Dynamic Graph draw operation.
Description: This command draws a Dynamic Graph during program execution in
accordance with current Dynamic Graph parameters.
DrawFTG-Con, DrawFTG-Plt
No parameters
Function: This command uses values in a generated table to graph a function.
Description:
• This command draws a function graph in accordance with current conditions.
• DrawFTG-Con produces a connect type graph, while DrawFTG-Plt produces a plot type
graph.
DrawGraph
No parameters
Function: This command draws a graph.
Description: This command draws a graph in accordance with current conditions.
DrawR-Con, DrawR-Plt
No parameters
Function: These commands use values in a generated table to graph a recursion expression
with a n ( b n or c n ) as the vertical axis and n as the horizontal axis.
Description:
• These commands graph recursion expressions in accordance with current conditions, with
a n ( b n or c n ) as the vertical axis and n as the horizontal axis.
• DrawR-Con produces a connect type graph, while DrawR-Plt produces a plot type graph.
To Next Page
Loading...
