20070201
u To select a range of cells
1. Move the cell cursor to the start cell of the
range you want to select.
2. Press ! i (CLIP).
• This will cause the cell cursor to change from
highlighting to a thick-line boundary.
• As you move the cell cursor, the edit box will
show the range of cells that are currently
selected.
3. Use the cursor keys to move the cell cursor
to the end cell of the range you want to
select.
Selected cells are highlighted.
• To cancel cell selection, press J . If you do, the cell cursor will be located at the end
cell of the range you selected.
9-3-4
Basic Spreadsheet Screen Operations
# Pressing ! i (CLIP) while an entire line is
selected, that line will be the selection range
start point. You can use the f and c
cursor keys to select additional lines.
# Pressing ! i (CLIP) while an entire column is
selected, that column will be the selection range
start point. You can use the d and e cursor
keys to select additional columns.
To Next Page
Loading...
Need help?
General
