20070201
u Running a Guide
This example shows how to run the guide created under “Creating a Guide” (page 10-6-2).
1. On the eActivity workspace screen, select the Graph strip and then press w.
• This will display the screen shown to the right.
2. Press the key indicated by the key indicator that appears in the upper or lower right
corner of the screen.
• This will cause the next key to be pressed to
appear in the upper or lower right corner.
3. Perform the key operation in accordance with the keys that appear on the screen.
• Exit Strip ON: w will appear in the upper or lower
right corner when the guide is
complete.
• Exit Strip OFF: The strip will be freely usable when the guide is complete. Note,
however, that this operation does not save the strip.
10-6-15
eActivity Guide
To Next Page
Loading...
Need help?
General
