20070201
k System Language Setting
Use LANG to specify the display language for built-in applications. You can also use add-ins
to install various other languages.
u To select the message language
1. From the initial SYSTEM mode screen, press 3 (LANG) to display the Message
Language selection screen.
• If your calculator has “Add-in Message Language
Data” installed, the applicable languages will
appear on the Message Language selection
screen.
2. Use the f and c cursor keys to select the language you want, and then press
1 (SEL).
3. The pop up window appears using the language you selected. Check the contents and
then press J .
Press J or !J (QUIT) to return to the initial SYSTEM mode screen.
u To select the menu language
1. From the initial SYSTEM mode screen, press 3 (LANG) to display the Message
Language selection screen.
2. Press 6 (MENU).
3. Use the f and c cursor keys to select the language you want, and then press
1 (SEL).
4. The pop up window appears using the language you selected. Check the contents and
then press J .
• Press 6 (MSG) to return to the Message Language selection screen.
Press J or !J (QUIT) to return to the initial SYSTEM mode screen.
11-2-3
System Settings
To Next Page
Loading...
