20110901
2-1-4
Data Communication Overview
• [Projector] ....................... Mode for connecting ClassPad to a projector and projecting
ClassPad screen contents. See “2-7 Projecting ClassPad Screen
Contents from a Projector” for details.
• [Cancel] .......................... Closes the Select Connection Mode dialog box without changing
the setting.
Tip
• Instead of tapping on-screen buttons, you can also use the keypad keys
1
through
5
to
select a connection mode.
Important!
The Select Connection Mode dialog box will not appear right away if you connect the USB
cable while a progress bar is displayed or while a calculation is in progress. Disconnect the
USB cable and wait until the progress bar disappears or the calculation is complete, and then
reconnect.
Using the ClassPad Communication Application
To perform a data transfer operation, tap
B
on the application menu to start up the
Communication application.
To Next Page
Loading...
Need help?
General
