20110901
(2) Select “View Storage & Import” and then tap [Select].
This displays a file selection dialog box. It shows the folders and XCP files in the
mass storage area.
•
(3) Select the XCP file you want to import and then tap [Import].
This displays a dialog box like the one shown below. The contents of the dialog box
depend on the type of file (Variable or eActivity) you are importing.
Variable eActivity
(4) Select the import destination folder you want and then tap [OK].
The dialog box shown below appears when import is complete.
(5) Tap [OK].
•
•
2-6-6
VCP and XCP File Operations
To Next Page
Loading...
