20110901
k
Performing the RAM Reset Operation
You should perform the RAM reset operation whenever your ClassPad freezes up or when
it begins to operate abnormally for some reason. The RAM reset operation should restore
normal ClassPad operation.
Important!
• The RAM reset operation deletes all data that is temporarily stored in ClassPad RAM.
Performing the RAM reset operation while a calculation is in progress will cause any data
stored in RAM by the calculation to be lost.
• Perform the RAM reset operation only when your ClassPad ceases to operate normally for
some reason.
u
ClassPad Operation
(1) Use the stylus to press the RESTART button on the back of the ClassPad.
• Following the RAM reset operation,
the ClassPad restarts automatically.
(2) After the ClassPad restarts, perform the ClassPad setup operation (touch panel
alignment, display contrast adjustment, display message language selection, keyboard
settings). See Chapter 16 in the separate Software User’s Guide for more information
about the ClassPad setup operation.
• The application menu appears after you finish the setup operation.
RESTART
Button
RESTART
Button
α
-1-2
Resetting and Initializing the ClassPad