― 25 ―
4.2 HOW TO START UP THE PROGRAM
Press [9] and then press RESET button with keep pressing [9].
Main menu of Diagnostic Program is displayed.
Chec Program1
Ver. 2.98
1. RAM
2. FROM
3. LCD
4. IrDA
5. Ls_Scan
TEST No. =
Five items are displayed on one screen.
[R] : display next page
[L] : display former page
4.3 HOW TO TERMINATE THE PROGRAM
Pressing Power SW makes the power supply off and terminate the program.
As the resume function does not activate, SYSTEM MENU starts up when turning on the power after the
Diagnostic Program is terminated.
4.4 COMMON OPERATIONS
Program No. + [ENT] : execute diagnostic module
[R] : Display next page [L] : Display former page
[F1] : Contrast adjustment [F2] : Backlight on/off
[F3] : Red LED on/off [F4] : Green LED on/off
[F5] : Buzzer (loud) on [F6] : Buzzer (medium) on
[F7] : Buzzer (soft) on [F8] : Buzzer off
[
.
] : Blue LED on/off [CLR] : Clears input number
<No error> Green LED light up and return to Menu Screen
<Error occurs> Red LED light up and an error message appears
4.5 ERROR CODE
Red LED lights up when error occurs.
Error :
∗∗∗∗
Sub1 :
∗∗∗∗∗∗∗∗
Sub2 :
∗∗∗∗∗∗∗∗
Sub3 :
∗∗∗∗∗∗∗∗
Sub4 :
∗∗∗∗∗∗∗∗
CLR : Exit
Error: Error code indicates the nature of the error.
For error code, please refer to “Error Code List”.
[ENT] Return to Menu Screen
To Next Page
Loading...
