― 44 ―
< Start up the Line machine >
(1) Execute AP starting up from System Menu and start up program for
BT diagnosis.
BTTest Ver1.09
1.BTTran
2.BTComm
5.CHK12pin
8.IR+LASER
CLR : EXIT
(2) Input [1]. No ENT needed.
[CLR]
BTTest Ver1.09
1.LINE
2.Server
3.Setti ng
CLR : EXIT
(3) Input [1]. No ENT needed.
[CLR]
BTTest Ver1.09
(Line)
1 . L ineTEST A
2 . L ineTEST B
3 . L ineTEST C
CLR : EXIT
(4) Input [1]. No ENT needed.
Be sure to select the same number as Server.
Communication does not take place if the numbers do not match.
BTTest Ver1.09
Line A:CSR bc2
Conn 0000 N>
It changes in sequence as below.
N> ........ Set up device name complete
Line A or B or C
N>I> ..... Search for Server designated by Inquiry
(device search)
Occasionally, it takes 30 sec. for the searching.
N>I>C> Connect to Server complete
* From now on, it performs sending and receiving automatically.
To Next Page
Loading...
