EasyManua.ls Logo

Casio DT-X100 Series - DT-X100 Wireless and Power Specifications; Wireless Frequency, Baud Rate, and Range; Power Requirements and Battery Life

Casio DT-X100 Series
66 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
E-30
Frequency: <Center frequency>
IEEE802.11a/n
W52:36/40/44/48ch (5.18 to 5.24GHz)
W53:52/56/60/64ch (5.26 to 5.32GHz)
W56:100/104/108/112/116/120/124/128/132/136/140ch (5.50 to
5.70GHz)
IEEE802.11b
1 to 13ch (2.412 to 2.472GHz)
IEEE802.11g/n
1 to 13ch (2.412 to 2.472GHz)
<Frequency range>
IEEE802.11a/n
5.15 to 5.35GHz (W52,W53)
5.47 to 5.725GH z (W56)
IEEE802.11b
2.400 to 2.497GHz
IEEE802.11g/n
2.400 to 2.4835GHz
Baud Rate: 802.11a/g : 54Mbps (maximum)
802.11b : 11Mbps (maximum)
802.11n : 65Mbps (maximum)
Communication Range: 802.11b/g/n :Approx.50m (indoor), Approx.150m (outdoor)
802.11a/n : Approx.50m (indoor), Approx.150m (outdoor)
Power Requirements:
Power Source: HA-F20BAT Battery Pack
HA-F21LBAT Large-capacity Battery Pack
Memory Backup: Rechargeable Lithium Battery (Built-in)
Consumption Current: DC 1.6A (DT-X100-10E)
DC 1.7A (DT-X100-20E)
Battery Life: Battery pack:
DT-X100-10E
Approximately 15 hours (HA-F20BAT)*
Approximately 26 hours (HA-F21LBAT)*
Approximately 10 hours (HA-F20BAT)**
Approximately 17 hours (HA-F21LBAT)**
DT-X100-20E
Approximately 13.5 hours (HA-F20BAT)*
Approximately 23 hours (HA-F21LBAT)*
Approximately 9 hours (HA-F20BAT)**
Approximately 15 hours (HA-F21LBAT)**
*
under the conditions that CPU speed is set to the auto power
save mode, backlight is set to off, and the ratio of cyclic
operation of “Standby, Key input, and Scanning” is set at
20:1:1.
** under the conditions that CPU speed is set to the auto
power save mode, backlight is set to off, and the ratio of
cyclic operation of “Standby, Key input, Scanning, and
WLAN” is set at 20:1:1:1.

Table of Contents

Other manuals for Casio DT-X100 Series

Related product manuals