EasyManuals Logo
Home>Casio>Handhelds>DT-X100 Series

Casio DT-X100 Series User Manual

Casio DT-X100 Series
66 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #49 background imageLoading...
Page #49 background image
E-47
Status of Indicator 1 on DT-X100:
Orange: Charging the battery pack.
Red: Standby due to battery pack error or the surrounding temperature is out of the
charging temperature range.
(charging begins when the temperature is within the charging temperature range)
Green: Charging the battery pack is complete.
Important !
Never short out the power contacts of the Cradle-type Battery Charger.  This 
can damage the Cradle-type Battery Charger.
Allowing the power contacts become wet can cause an electric shock or re. In
addition, if the contacts become soiled, contact may be impaired resulting in 
poor charging.  For reasons of safety and maintaining charging battery pack(s) 
in optimum condition, clean the power contacts by wiping with a dry cloth or
cotton swab after disconnecting the AC adaptor.
When placing the DT-X100, make sure that it is seated properly and that the 
power LED at the front of the Cradle-type Battery Charger is lit in green. 
Charging and communication will not proceed properly if the Handheld 
Terminal is not seated properly. 
Place the Cradle-type battery charger on a at, level surface and take care when
placing the DT-X100 in or removing it from the cradle.

Table of Contents

Other manuals for Casio DT-X100 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Casio DT-X100 Series and is the answer not in the manual?

Casio DT-X100 Series Specifications

General IconGeneral
BrandCasio
ModelDT-X100 Series
CategoryHandhelds
LanguageEnglish

Related product manuals