73
Using BEST SHOT
When you press the shutter button while High Speed Anti Shake is enabled, the
camera records multiple images and automatically combines them in a way that
produces a final image with minimal blur. You can shoot with this feature to minimize
the effects of camera movement when shooting with optical anti shake does not
produce the desired results.
1. In the REC mode, press [BS] (BEST SHOT).
2. Select “High Speed Anti Shake” and then press [SET].
3. When you are ready to shoot, press the shutter button.
NOTE
• With this BEST SHOT scene, the flash setting automatically becomes ? (Flash
Off).
• High Speed Anti Shake may not operate properly resulting in blurred images if the
camera is moved more than the allowable range or if the subject moves during
shooting.
• When shooting with this BEST SHOT scene, the “ISO Sensitivity” setting is fixed at
“AUTO”.
With HDR (High Dynamic Range), the camera shoots a series of CS images using
different exposure settings and combines them into a final image to correct for
overexposure or underexposure of subjects of different brightness levels.
1. In the REC mode, press [BS] (BEST SHOT).
2. Select “HDR” and then press [SET].
3. Press the shutter button to shoot.
Shooting with High Speed Anti Shake
(High Speed Anti Shake)
Digitally Correcting for Overexposure and Underexposure
(HDR)
To Next Page
Loading...
Need help?
General
