75
Using BEST SHOT
NOTE
• HDR Art works best when shooting with the camera mounted on a tripod.
• With this BEST SHOT scene, the flash setting automatically becomes
?
(Flash
Off).
• Anti shake correction performed to compensate for camera movement while
shooting with this function results in an image area that is narrower than normal.
• The desired HDR Art effect may not be attained if the camera or subject moves
during shooting.
• Depending on shooting conditions and image composition, this BEST SHOT scene
may not be able to produce the desired result.
1. In the REC mode, press [BS] (BEST SHOT).
2. Select “HDR Art” and then press [SET].
3. Record the movie the same way as you would a normal movie
(page 55).
Press [0] (Movie) to start and stop recording.
IMPORTANT!
• Certain shooting conditions when shooting a movie with this function can cause the
image and audio to be out of sync.
• “Art Effect” settings are not reflected in movies.
NOTE
• With this BEST SHOT scene, the “» Quality” can be either “HD” or “STD” only
(page 98).
• When any “» Quality” setting other than “STD” is selected in another mode, the
“HD” setting is used when shooting with this BEST SHOT scene.
To shoot a movie with HDR Art (HDR Art Movie)
To Next Page
Loading...
Need help?
General
