109
Dynamic Photo
1. Press [p] (PLAY) and then use [4] and [6] to display the Dynamic
Photo you want to view.
2. If you want to see the subject in the Dynamic Photo move, press [SET].
The Dynamic Photo is repeated as a continuous loop.
• Movement of the subject also will start automatically about two seconds after
you display a Dynamic Photo.
A Dynamic Photo with a still image background and a moving subject is stored as a
series of 20 still images. You can use the following procedure to convert the 20
images that make up a Dynamic Photo to a movie.
Procedure
[p] (PLAY) * Dynamic Photo Screen * [MENU] * PLAY Tab *
Movie Converter
• The final movie format is Motion JPEG.
• The final movie image size is 640
x
480 pixels.
IMPORTANT!
• Following conversion, the movie will be played back three times.
To view a Dynamic Photo (Dynamic Photo File)
Converting a Dynamic Photo Still Image to a Movie
(Movie Converter)
To Next Page
Loading...
