111
Dynamic Photo
NOTE
• The camera comes with a number of extracted sample subjects in its built-in
memory, which you can use to create Dynamic Photos, if you like.
• Performing a delete or format operation will delete the sample subjects in built-in
memory. If you delete the sample subjects, you can download them from the
Dynamic Photo Special Site (http://dp.exilim.com/) and restore them to built-in
camera memory.
• You can copy the sample subjects to a memory card using the “Built-in * Card”
copy operation (page 106).
1. Press [p] (PLAY) and then use [4] and [6] to display the Dynamic
Photo you want to view.
2. If the Dynamic Photo has a moving subject, press [SET].
• Subject movement is repeated as a continuous loop.
A Dynamic Photo (a background image plus subject) is stored as a series of 20 still
images. You can use the following procedure to convert the 20 images that make up
a Dynamic Photo to a movie.
Procedure
[p] (PLAY) * Dynamic Photo Screen * [MENU] * PLAY Tab *
Movie Converter
• The final movie format is Motion JPEG.
• The final movie image size is 640
x
480 pixels.
IMPORTANT!
• This operation can be used only to convert Dynamic Photos to movies.
• Following conversion, the movie will be played back three times.
To view a Dynamic Photo
Converting a Dynamic Photo to a Movie (Movie Converter)
To Next Page
Loading...
Need help?
General
Weight and Dimensions
