167
Appendix
When shooting
with Auto Shutter,
the shutter does
not trigger.
Auto Shutter may not trigger when shooting under very bright or
very dark conditions, or when shooting a fast moving subject,
etc. If this happens, try changing the Auto Shutter Trigger
Sensitivity setting (page 70), or press the shutter button all the
way down to release the shutter and shoot the image.
The image is out of
focus during movie
recording.
1)Focusing may not be possible because the subject is outside
the focus range. Shoot within the allowable range.
2)The lens may be dirty. Clean the lens (page 153).
Playback
The color of the
playback image is
different from what
appears on the
monitor screen
when shooting.
Sunlight or light from another source may be shining directly
into the lens when you are shooting. Position the camera so
sunlight does not shine directly into the lens.
Images are not
displayed.
This camera cannot display non-DCF images recorded onto a
memory card using another digital camera.
Images cannot be
edited (with Layout
Print, resizing,
trimming, keystone
correction, color
restoration, date/
time editing,
rotation).
1)Note that you cannot edit the following types of snapshots.
• Snapshots created using MOTION PRINT
•Movies
• Snapshots recorded with another camera
2)With keystone correction and color restoration, editing is not
possible if the camera cannot find a shape to edit within the
frame on the monitor screen (pages 100, 101).
Other
The wrong date
and time are
displayed, or the
wrong date and
time are being
stored along with
image data.
The date and time setting is off. Set the correct date and time
(page 142).
The messages on
the display are in
the wrong
language.
The wrong display language is selected. Change the display
language setting (page 143).
Problem Possible Cause and Recommended Action
To Next Page
Loading...
Need help?
General
Weight and Dimensions
