8
Creating a Dynamic Photo Image
4. Use [4] and [6] to select the subject you want
to insert and then press [SET].
* Only subjects that can be inserted into other images will
appear at this time.
5. Use the zoom controller to adjust the size of the
subject and use [8], [2], [4], and [6] to adjust
its position. When everything is the way you
want, press [SET].
This inserts the subject into the background image and
creates a Dynamic Photo.
6. After creation of the Dynamic Photo image is
complete, the finished image with the moving
subject will appear on the monitor screen.
• The size of a Dynamic Photo image created by inserting a moving subject into a
background image is 2M. If the background image into which a moving subject is
inserted is smaller than 2M, the resulting image will be the same size as the
background image.
• The size of a Dynamic Photo image created by inserting a stationary subject into a
background image is 6M. If the background image into which a stationary subject is
inserted is smaller than 6M, the resulting image will be the same size as the
background image.
Complete!
To Next Page
Loading...
Need help?
General
Weight and Dimensions
