35
Snapshot Tutorial
. To add a face data shot to an existing pre-recorded family member
Face recognition efficiency can be improved by recording three or four face data
shots under various conditions for a single individual.
1. In the REC mode, press [SET].
2. Use [8] and [2] to select the fifth Control Panel option from the top
(Face Recognition).
3. Use [4] and [6] to select “J Edit Family” and then press [SET].
4. Use [8], [2], [4], and [6] to select the thumbnail of face data to which
you want to add another face data shot, and then press [MENU].
5. Use [8] and [2] to select “Add”, and then press [SET].
6. Perform steps 4 and 5 under “To pre-record the faces of family
members, etc.” (page 33) to add the face data shot.
NOTE
• Camera memory can store face data for up to six individuals, and up to 12 face
data items.
To Next Page
Loading...
