51
Snapshot Tutorial
9. Use [4] and [6] to select the continuous shutter
(CS) speed you want.
10.
Use [8] and [2] to select the third control panel
option from the bottom (Max CS shots).
11.
Use [4] and [6] to select the maximum number of shots for each
continuous shutter operation.
12.
Use [8] and [2] to select the second control panel option from the
bottom (Prerecord CS shots).
13.
Use [4] and [6] to specify how many of the 30 images and for how
long images should be pre-recorded in the buffer.
• Prerecord CS shooting is not performed when the number of buffer images and
the recording time are both zero.
14.
Press [SET].
• The approximate number of recordable CS images will appear on the monitor
screen.
3 to 40 fps
Enables specification of the number of CS images recorded per
second.
Shutter button full-press
Number of pre-record
images and pre-record
time
Number of remaining images
and remaining recording time
after the shutter button full-
press
Number of recordable CS images (If you are not performing
Prerecord CS, the allowable continuous shutter time also is displayed.)
Remaining snapshot memory capacity
CS speed
To Next Page
Loading...
