E-10
Input expression
Calculation result
A
Display Symbols
The symbols described below appear on the display of the calculator to indicate the current
calculation mode, the calculator setup, the progress of calculations, and more.
The nearby sample screen shows the
7
symbol.
The
7
symbol turns on when degrees (Deg) are selected for
the default angle unit (page 12).
Calculation Modes and Setup
k
Selecting a Calculation Mode
Your calculator has 11 “calculation modes”.
A
Selecting a Calculation Mode
1. Press
N
.
• This displays the calculation mode menu. Use
c
and
f
to switch between menu
screen 1 and screen 2.
Screen 1 Screen 2
2. Perform one of the following operations to select the calculation mode you want.
To select this calculation mode: Go to this screen: And press this key:
COMP (Computation)
Screen 1
1
(COMP)
BASE-N (Base
n
)
2
(BASE-N)
SD (Single Variable Statistics)
3
(SD)
REG (Paired Variable Statistics)
4
(REG)
PROG (Programming)
5
(PROG)
RECUR (Recursion)
6
(RECUR)
TABLE (Tables)
7
(TABLE)
EQN (Equations)
8
(EQN)
To Next Page
Loading...
