Advaned Registration Functions
To
perform
alternate
r$
printing
1. Insert a slip into the slip printer.
2. An
error occurs
here if
you attempt
to perform a registration
without
a
slip
in
the slip printer when
the register is
programmed as alternate
slip
printing
compulsory.
3. Each
item
you register is printed on
the receipt
and
journal.
4. Each item
you
register is printed on the slip.
5.
Loop here
as
required to register more
items.
6. Temporarily finalize the registration
using the
New
Balance key, or
finalize the registration using one of the
finalization keys.
7. Remove the
slip
from
the slip
printer.
To perform
auto
mtch
printing
1.. Insert a slip
into
the slip printer.
2. Temporarily finalize the registration using the New
Balance key, or
hnalize the registration using one of the
finalization keys.
3. Printing starts after finalization
is
complete.
4. Remove
the slip
from
the slip
printer.
You can also use the following
procedure to perform
auto
batch printing.
The difference between this procedure and the one above
is the timing of
insertion
of the slip
into the printer.
Temporarily finalize
the
registration
using
the
New
Balance key,
or
finalize the registration using
one
of the finalization keys.
Insert a slip into the slip printer.
Press the
Slip
Print key to
start slip
printing.
Remove the slip from the
slip
printer.
About
the maximum You can program the maximum number of lines that can be printed on a
number
of slip lines slip. Once
you
do,
any attempt to exceed
the preset maximum results in an
error.
When
such an error occurs,
press
the Clear
key
and perform one of
the two following operations.
o
Alternate Printing
Change slip paper.
o
Batch Printing
Change slip paper and press
the
Slip
Print
key
to
re-start
printing.
1.
2.
3.
4.
53
To Next Page
Loading...
Need help?
General
