Casio I/O-PB-11 User Manual

Registration
Functions
4-
lfinnced
The functions described
here are
for more specialized,
applications
and can
be used as
needed.
+l $ck Check
Operation
-
lYaming
tselors
Each
Long PLU has an actual
stock totalizer
that you
can
Program
with a
minimum stock
quantity.
Then the register
checks actual
stock
quantities
against
the
programmed minimum
stock
quantities. Stock
operations are
performed only for Long
PLUs
programmed with minimum
stock
quantities.
The cash register checks
for negative
values
in
actual
stock quantities
during
the registration
itself. After
registration
is complete,
it checks actual stock
quantities against
minimum
stock
quantities.
The following
warning
indicators
are used to
inform the operator
of any
problems.
o
"
-STOCK"
displayed during
registration
This message
indicates that the actual
stock
quantity
is negative.
You
can
also program
the cash
register to treat
this condition as
an error.
This
warning does not appear
when actual
stock quantity
is
zero.
o
"MIN.STOCK"
displayed and
buzzer sounds
after
registration
This message
indicates that
the actual stock
quantity
is less than or
equal
to the minimum stock
quantity.
The cash
register can be
programmed so
that
a
buzzer sounds
when the actual
stock quantity
is
less than the
minimum stock
quantity.
Notes
The stock check operation
is also
performed
for Long
PLUs programmed
with minimum stock
quantities that
make uP set
menus.
None
of the
warning indicators
appear unless
the cash
register
is
specifically
programmed for
the stock check operation.
Stock operations
can be
performed
for registrations
in the
RF Mode or
those performed
with the
Refund key.
o
An error
correct,
void,
or
cancel operation
restores the original
number
of
items in stock
value.
f{ Clerk
(Cashier)
lnterrupt
Function
There
are
two types of
clerk/cashier
intemrpt
function,
illustrated
by
Procedure
1
and
Procedure
2 below.
o
In Procedure
1.,
each clerk
possesses a
unique clerk
intemrpt
buffer, and
so the clerk
intemrpt function
gives each
individual
clerk
the ability
to
perform
an
independent
registration operation.
In this case,
each clerk
is
individually
linked to a unique
clerk
intermpt buffer.
r
In Procedure 2,
multiple
clerks
use the same clerk
intermpt buffer, and
so
a single clerk
intermpt operation
(clerk
change during
registration) can be
performed
while
any
registration
is in
progress.
In this case,
multiple
clerks are
linked to a single clerk
intemrpt
buffer.
31

Casio I/O-PB-11 Specifications

General

Brand	Casio
Model	I/O-PB-11
Category	Cash Register
Language	English