E-60
1. Turn off the power of the Handheld
Printer Terminal by pressing the power
key.
2. Open the jack cover ( ), and then
insert the plug of the AC Adapter into
the charging jack ( ).
After connecting the power cable to the
AC adaptor, plug the other end of it into
an electrical outlet.
3. Charging begins and Indicator 1 on the Handheld Printer Terminal lights red.
Charging is completed when Indicator 1 changes to green. (Charging time is about 8
hours with the power off.)
* The indicator may light even if the battery pack is not installed. Make sure that the
battery pack is installed when charging.
Important!
• Securely install the battery pack.
• Charge in a location free of vibrations.
• Use only the dedicated AC Adaptor (AD-S10095AE/AU) to charge the battery
pack.
• Turn off the power of the Handheld Printer Terminal when connecting the AC
Adaptor.
• When the battery pack has been reinstalled with the battery charger still
plugged into the Handheld Printer Terminal, always make sure to first unplug
the battery charger and then plug it in again.
Using the AC Adaptor (AD-S10095AE/AU)
1
2
1
2
To Next Page
Loading...
Need help?
General
