EN-14
Operations Common to All Modes
An item that can be selected using a list is indicated by
the “” icon.
1.
Touch the item whose setting you want to
change.
2.
On the list that appears, touch the item to
which you want to change.
A setting value that can be changed is indicated by a
“ ” icon. You can use either of the two procedures
below to change a setting value.
■ To change a setting value using buttons or a
dial operation
1.
Touch the item whose setting you want to
change.
2.
Use the bp VALUE dial or the 9 w/NO,
q/YES buttons to change setting value.
• Holding down either of the 9 w/NO, q/YES
buttons scrolls through values at high speed.
• Pressing the 9 w/NO, q/YES buttons at the same
time returns the setting to its initial default.
To select an item in a list To change a setting value
MZX300_X500-ES-1A.indd 16 2015/10/07 15:46:41
To Next Page
Loading...
Need help?
General
