EN-20
Playing with Different Tones
You can specify from 0 to nine beats per measure for
the metronome.
Specifying 0 will cause each beat to be indicated by the
same sound. This setting lets you practice with a steady
beat.
1.
On the MENU screen, touch “SYSTEM
SETTING”.
2.
Touch “Metronome Beat”.
3.
Use the 9 w/NO, q/YES buttons to
select a beats per measure value.
4.
On the screen, touch bn MAIN.
This returns to the MAIN screen.
You can use the following procedure to adjust the
volume level of the metronome, without affecting the
volume of keyboard output.
1.
On the screen, touch bm MENU.
This displays the MENU screen.
2.
Touch “BALANCE”.
3.
Touch “Metronome Volume”.
4.
Use the 9 w/NO, q/YES buttons to
adjust the metronome volume setting (0 to
127).
5.
On the screen, touch bn MAIN.
This returns to the MAIN screen.
There are two different methods you can use to change
the tempo setting: using the 7 TEMPO w, q
buttons for gradual change, or by tapping a beat with
the 6 TAP TEMPO button (tap input).
■ Method 1:
To adjust the tempo setting using the
7
TEMPO w, q buttons
1.
Use the 7 TEMPO w, q buttons to adjust
the tempo setting.
Each press of a button increases or decreases the tempo
value (beats per minute) by one.
• Holding down either button changes the value at
high speed.
• You can specify a tempo value in the range of 20 to
255.
■ Method 2:
To adjust the tempo by tapping a beat (tap
input)
1.
Tap the 6 TAP TEMPO button a number of
times at the tempo you want to set.
• The tempo setting will change in accordance with
your tapping.
• After you use this method to specify the approximate
tempo, you can then use the procedure under “To
adjust the tempo setting using the 7 TEMPO w,
q buttons” to adjust the setting to a more exact
value.
To change the beats per measure
Adjusting the Balance between
Metronome and Keyboard Volume
(Metronome Volume)
Changing the Tempo Setting
Tap two or more times.
MZX300_X500-ES-1A.indd 22 2015/10/07 15:46:42
To Next Page
Loading...
Need help?
General
