To Next PageTo Next PageHow to fix no sound on Casio Electronic Keyboard?
If no sound comes from your Casio Electronic Keyboard when you press a key, first, check the VOLUME controller and rotate it towards “MAX”. If that doesn't work, ensure nothing is plugged into the PHONES jack. Also, make sure the Upper 1 icon is on. Finally, verify that the “Speaker” SYSTEM SETTING is enabled.
Why is the pitch off on my Casio MZ-X300 Electronic Keyboard?
If the pitch of your Casio Electronic Keyboard sounds off, you can try the following: 1. Adjust the keyboard tuning or turn it off and on again. 2. Ensure the key setting is at “440.0 Hz”, or power cycle the keyboard. 3. Set the temperament to “Equal”. 4. Make sure the octave shift setting is set to 0.
What to do if playback stops transferring song data to Casio MZ-X300 Electronic Keyboard?
If playback stops while transferring song data from your computer to your Casio Digital Keyboard, it might be due to digital noise. Try stopping the playback, disconnecting, and then reconnecting the USB cable. If the problem persists, quit the MIDI software, disconnect and reconnect the USB cable, then restart the MIDI software and try again.
Why do tones sound strange on my Casio Electronic Keyboard?
If tones and/or effects sound strange on your Casio Electronic Keyboard, and turning it off and on doesn't help, it might be due to the “Auto Resume” feature. Try turning off “Auto Resume”, then turn the power off and back on again.
What to do if I cannot transfer data to my Casio MZ-X300 Electronic Keyboard?
To transfer data after connecting your Casio Digital Keyboard to a computer: 1. Check the USB cable connection to both the keyboard and computer, and ensure the correct device is selected in your music software. 2. Turn off the Digital Keyboard, exit the music software, then turn the keyboard back on and restart the software.
General| Brand | Casio |
|---|---|
| Model | MZ-X300 |
| Category | Electronic Keyboard |
| Language | English |
Procedure to reset stored data and settings to initial factory defaults.
Instructions for using the AC adaptor and important precautions.
Step-by-step guide for powering the keyboard on and off.
Navigating the keyboard interface using the display, MENU, and MAIN screens.
Selecting rhythms and starting Auto Accompaniment play with chords.
Saving current settings as registration memory for instant recall.
Overview of MIDI Recorder and Audio Recorder functions for capturing performances.
Step-by-step guide to recording performances into internal memory using MIDI.
Recording performances as audio files directly to a USB flash drive.
Changing tones, rhythms, keyboard, pedal, and MIDI settings via the MENU.
Configuring global settings like speaker output, touch response, and tuning.
Step-by-step guide for connecting via USB for MIDI data exchange.
Lists common error messages, their causes, and actions to resolve them.
Common problems, causes, solutions, and page references for help.
Detailed technical specifications for the MZ-X500 and MZ-X300 models.
