EN-6
General Guide
Back
AUDIO VOLUME
controller
LINE OUT R, L/MONO jacks
MIDI OUT/THRU, IN terminals
USB port
PEDAL1 jack
AUDIO IN jack
DC 24V terminal
LINE IN R, L/MONO jacks
MIC IN jack
MIC VOLUME controllerPEDAL2, EXPRESSION jack
Insert the bottom of the music stand into the groove on
the top of the Digital Keyboard’s console.
The liquid crystal panel of the monitor screen uses
high-precision technology that provides a pixel yield in
excess of 99.99%. This means that some very small
number of pixels may not light or may remain lit at all
times. This is due to the characteristics of the liquid
crystal panel, and does not indicate malfunction.
Perform the following procedure when you want to
return the Digital Keyboard’s stored data and settings
to their initial factory defaults.
1.
Turn off the Digital Keyboard.
2.
While holding down the 7 TEMPO w, q
buttons, press the 1 P button.
• The Digital Keyboard will turn on and initialize its
internal system. You will be able to use the Digital
Keyboard in a short while.
• See “Turning Power On or Off” (page EN-7) for
information about turning power on and off.
You can download the separate “Tutorial Manual” and
“Appendix”* from the website below.
http://world.casio.com/
* Tone and rhythm lists
* Installing the Music Stand
LCD Panel
Returning the Digital
Keyboard to Its Factory
Default Settings
Separate Tutorial Manual
MZX300_X500-ES-1A.indd 8 2015/10/07 15:46:39
To Next Page
Loading...
Need help?
General
