User Presets
EN-39
1.
On the MUSIC PRESET EDIT screen (page EN-36), touch “Parameter Edit”.
This displays the PARAMETER EDIT screen.
2.
Touch the parameter whose setting you want to change, and then use the 9 w, q buttons to
change the setting value.
3.
After you are finished editing, touch bo EXIT to return to the MUSIC PRESET EDIT screen.
To change how an Auto Accompaniment is played
Parameter Description Setting
Synchro Type:
Synchro type
Selects the synchro standby status and type when
the music preset is selected.
Off (no standby)
Variation 1 to 4: Standby synced to Variation 1 to 4
Intro 1, 2: Standby synced to Intro 1 or 2
Intro Chord:
Intro chord
Selects from among major (12 keys) and minor (12
keys) for the intro chords.
C to B: Major (C to B)
Cm to Bm: Minor (Cm to Bm)
Ending Chord:
Ending chord
Selects from among major (12 keys) and minor (12
keys) for the ending chords.
C to B: Major (C to B)
Cm to Bm: Minor (Cm to Bm)
Auto Fill-In:
Auto fill-in on/off
Specifies whether or not a fill-in should be
inserted into the final measure of a chord
progression.
Off: Fill-in not inserted
On: Fill-in inserted
Timing Set:
Chord progression
variation
This parameter lets you add different variations to
the timing of the chord progression being edited.
You can use it to match the chord progression to
the beat of a specific rhythm.
For information about differences in playback for
each setting value, see “Timing Setting and Chord
Progression Playback” (page EN-40).
Normal, Half, Double, 3/4, 3/2
To Next Page
Loading...
Need help?
General
Weight and Dimensions
