Editing Events
EN-79
• Chord events can be input to the MIDI recorder
system track only.
• In the case of the MZ-X500, you can also input chord
event steps into a pad that is assigned a chord
progression.
1.
On the EVENT EDIT screen, touch “Setting”.
2.
Touch “Step Rec Insert Type”.
3.
Touch “Chord”.
4.
Touch bo EXIT to return to the EVENT EDIT
screen.
5.
Input chords using the procedure under
“Directly Inputting Note Events (Step Input)”
(page EN-78).
1.
On the EVENT EDIT screen, touch “Setting”.
2.
Touch one of the items below and then use
the 9 w/NO, q/YES buttons to change
the setting.
• To change a setting value in increments of 10, hold
down the 9 w/NO or q/YES button as you rotate
the bp VALUE dial.
3.
Touch bo EXIT to return to the EVENT EDIT
screen.
To insert a chord event To adjust input event parameters
Item Description Setting
Step Rec Velocity
(Velocity)
Specifies the velocity
value of an input note
event or chord event.
Specifying “KeyOn”
inputs a velocity value in
accordance with applied
key pressure.
KeyOn,
0 to 127
Step Rec Gate
Time Rate
(Gate time rate)
Specifies, as a percent
value, the length that a
note is actually sounded
(gate length) for a note
event, based on a specified
note.
1% to 100%
To Next Page
Loading...
Need help?
General
Weight and Dimensions
