SE-S100 / PCR-T285 / PCR-T295
– 23 –
5-4. Test Procedures
[1] Status Display
[Function]
Displays the device status.
* The device status is not displayed on the customer display.
[Display]
Display Descriptions Display Descriptions
Mode Switch Status
Paper Status
1 PGM (programming) On No paper
2 RF (refund) Off Paper is set
3 REG (register)
Platen Arm Status
4 CAL (calculation) On Platen arm is open
5 X (read) Off Platen arm is set
6 Z (reset)
Battery Status
Drawer Status On Low battery
On Drawer is open Off Normal
Off Drawer is close
SD Status
On SD card is inserted
Off SD card is not inserted
To Next Page
Loading...
Need help?
General
