3
Additional Functions of the firmware 1.10
It is explained the function added or changed in firmware 1.10 here.
■
Key Follow function of the filter and amplifier in the HEX LAYER is improved
Key Follow function of the filter and amplifier in the HEX LAYER is improvedKey Follow function of the filter and amplifier in the HEX LAYER is improved
Key Follow function of the filter and amplifier in the HEX LAYER is improved.
..
.
They are editable independently in each layer as follows.
Display Text Description Settings
Filter >Ent Parameter Group of the filters
Low Key Follow
Adjusts the amount of cutoff frequency change between neighboring
keyboard keys. The change will be bigger according to the value increases. If
the value is positive, the cutoff frequency of lower side of the keys become
lower.
-128 - 0 - +127
Low Key
The key follow function works from this key toward the lower
side.
C- - G9
(Low Key < or = High Key)
High Key Follow
Adjusts the amount of cutoff frequency change between neighboring
keyboard keys. The change will be bigger according to the value increases. If
the value is positive, the cutoff frequency of higher side of
the keys become higher.
-128 - 0 - +127
High Key
The key follow function works from this key toward the
higher side.
C- - G9
(Low Key < or = High Key)
Amp >Ent Parameter Group of the Amplifiers
Low Key Follow
Adjusts the amount of cutoff frequency change between neighboring
keyboard keys. The change will be bigger according to the value increases. If
the value is positive, the cutoff frequency of lower side of
the keys become lower.
-128 - 0 - +127
Low Key The key follow function works from this key toward the lower side.
C- - G9
(Low Key < or = High Key)
High Key Follow
Adjusts the amount of cutoff frequency change between neighboring
keyboard keys. The change will be bigger according to the value increases. If
the value is positive, the cutoff frequency of higher side of
the keys become higher.
-128 - 0 - +127
High Key
The key follow function works from this key toward the
higher side.
C- - G9
(Low Key < or = High Key)
■
A portamento function is added to Melody Tone and Hex Layer tone
A portamento function is added to Melody Tone and Hex Layer toneA portamento function is added to Melody Tone and Hex Layer tone
A portamento function is added to Melody Tone and Hex Layer tone.
..
.
New parameters are added to the common parameter group of Melody tone and Hex Layer tone as follows.
Display Text Description Settings
Portamento >Ent Parameter Group of the portamento
Portamento On/Off
Enables or disables the portamento function.
When it is set to On, the pitch will change smoothly.
Off, On
Time Adjusts the time of the change of the pitch. 0 - 127
To Next Page
Loading...
