4
■
A playback volume control is added to the Audio Recorder.
A playback volume control is added to the Audio Recorder.A playback volume control is added to the Audio Recorder.
A playback volume control is added to the Audio Recorder.
A playback volume control parameter of the Audio Recorder is added in SYS SETTING menu as follows.
Display Text Description Settings
Sound Generator >Ent Parameter Group of the sound generator
Audio Volume Adjusts the playback volume level of the Audio Recorder. 0 - 127
■
A damper noise volume control is added to the damper resonance function
A damper noise volume control is added to the damper resonance functionA damper noise volume control is added to the damper resonance function
A damper noise volume control is added to the damper resonance function.
..
.
A damper noise volume control parameter is added in SYSTEM EFFECT menu as follows.
Display Text Description Settings
Damper Noise Level
Adjusts the volume level of the Damper Noise of the Damper Resonance
effect
0 - 15
■
'Toggle Mode' is added to the pedal function
'Toggle Mode' is added to the pedal function'Toggle Mode' is added to the pedal function
'Toggle Mode' is added to the pedal function.
..
.
'Toggle Mode' parameter is added to the Pedal1 and Pedal2 Edit in the Stage Setting common edit menu as follows.
Display Text Description Settings
Pedal1-2 Edit >Ent Parameter Group of the Pedal1/2
Mode
Specifies the behavior the pedals.
Momentary: Pedal is on while holding down, return to off when the pedal is
released.
Toggle: Pedal becomes on and off alternately when it is held down.
Momentary,
Toggle
■
MIDI Rx message filters are added
MIDI Rx message filters are addedMIDI Rx message filters are added
MIDI Rx message filters are added.
..
.
MIDI Rx message filter parameters are added to the MIDI group in SYS SETTING as follows.
Display Text Description Settings
Rx Filter >Ent Parameter Group of the Rx Filter
Control Change
Off: Control Change messages are recognized
On: Control Change messages are not recognized
Off, On
Program Change
Off: Program Change messages are recognized
On: Program Change messages are not recognized
Off, On
Channel Pressure
Off: Channel Pressure messages are recognized
On: Channel Pressure messages are not recognized
Off, On
Pitch Bend
Off: Pitch Bend messages are recognized
On: Pitch Bend messages are not recognized
Off, On
To Next Page
Loading...
