EN-32
Configuring Settings with the Keyboard
■ MIDI and Other Settings
Parameter Settings
Operation
Type
(page
EN-25)
Description Remarks
USB flash drive
mode
MIDI, Storage
Default: MIDI
DThe Digital Piano enters MIDI
mode automatically when it is
connected to a computer by a USB
cable. Select storage when saving
Recorder memory song data to a
computer or when loading
computer song data to Digital
Piano memory. (page EN-46)
• After this setting is changed to Storage, the
GRAND PIANO, E.PIANO 1, and R lamps
will flash, and all other lamps will be unlit.
• All Digital Piano operations are disabled at
this time.
• Each press of the USB device mode
keyboard key toggles between the MIDI
and storage modes.
Local control
Off, On
Default: On
D Selecting “Off” for Local control
cuts off the Digital Piano’s sound
source, so no sound is produced by
the Digital Piano when keys are
pressed.
Send channel
1 to 16
Default: 1
B Specifies one of the MIDI channels
(1 through 16) as the Send channel,
which is used for sending MIDI
messages to an external device.
Audio Recorder
Volume
(PX-870)
00 to 42
Default: 42
B You can adjust the volume level of
audio data recorded to a USB flash
drive.
• The volume level cannot be adjusted while
recording.
Operation tone
Off, On
Default: On
D Selecting “Off” disables sounding
of the operation tone whenever a
keyboard key is pressed while the
FUNCTION is depressed.
• This setting is retained even when the
Digital Piano is turned off.
Panel lock
Off, On
Default: Off
D Selecting “On” for this setting locks
the Digital Piano’s buttons (except
for the P (Power) button and the
buttons required for unlock), so no
operation can be performed.
Turn on operation lock when you
want to protect against
unintentional button operations.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
