EN-46
Connecting to a Computer
What is MIDI?
The letters MIDI stand for Musical Instrument Digital
Interface, which is the name of a worldwide standard
for digital signals and connectors that makes it possible
to exchange musical data between musical instruments
and computers (machines) produced by different
manufacturers.
• For detailed information about MIDI
Implementation, visit the CASIO website at:
http://world.casio.com/
.
See “Send channel” and “Local control” on page
EN-32.
Use the procedures in this section to transfer Recorder
memory data to a computer for storage, and to load
songs to user song memory (Music Library 61 to 70).
•Turning off the Digital Piano while data is being
saved or loaded can cause all data currently stored
in Digital Piano memory (recorded songs, etc.) to be
deleted. Take care so power is not turned off
accidentally during data save and load operations. If
data is deleted, it will take longer than normal for the
Digital Piano to power up the next time you turn it on
(page EN-5).
1.
Perform steps 1 through 3 of the procedure
under “Connecting the Digital Piano to Your
Computer” on page EN-45.
2.
Change the Digital Piano’s USB device mode
to storage.
• While holding down the FUNCTION button, press
the keyboard key that corresponds to the USB device
mode.
• After this setting is changed, the GRAND PIANO,
E.PIANO 1, R lamps flash, and all other lamps are
unlit.
• See “USB flash drive mode” on page EN-32 for more
information.
3.
On your computer, perform the required
operation to display your computer’s storage
devices.
• The memory of this Digital Piano will appear as
“PIANO” under “Devices with Removable Storage”.
Using MIDI
Transferring Song Data with a
Computer
If your computer is
running this operating
system:
Do this:
Windows Vista,
Windows 7
Double-click “Computer”.
Windows 8.1,
Windows 10
Open any folder. On the
navigation window, click
“PC”.
Mac OS Skip step 3 and double-click
“PIANO” on your Mac
desktop.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
