Casio PX-150 - COMPONENT REMOVAL PROCEDURE; REMOVE THE PANEL UNIT

PX-150
– 15 –
<Notes on Assembly>
• There is no gap between the KEY FELT for the console unit and that for the panel unit, which
are placed behind the black key.
NOTE: Assemble the other side in the same manner.
KEY FELT
for panel unit
KEY FELT
for console unit
Black key
C. Remove the Panel Unit
NOTE: The basic procedure to remove the part is the same on both sides.
C-1. Undo two screws on the side surface and then remove the CASE/SIDE.
Hooks
CASE/SIDE