Casio PX-150 - KEYBOARD DISASSEMBLY - KEYS; REMOVE THE KEYS

PX-150
– 24 –

Disassembly of the KEYBOARD UNIT
A. Remove the KEY
<Removing the Keys>
• To remove the keys, you will need two of the tools described below.
• Beforeremovingablackkey,youmustrstremovebothwhitekeysoneithersideoftheblack
key.
• White keys may be removed with the same procedures as removing black keys.
<Tool>
• The tool used in the photos in this section was converted from a gardening ID tag. The size and
shape of an ID tag accord to the dimensions below.
<Note on Shaping an ID Tag>
• The thickness of the tool must be within 1.2 ~ 1.3 mm. If the tool is too thin, removing keys
becomedifcult.Ifthetoolistoothick,itmaydamagetheribofthechassis.
<Tool Dimensions>
Thickness:
within 1.2~1.3 mm
R=2.75 mm
7 mm
Use this part to
remove the key.
Width:
15~20 mm