Casio PX-330BK User Manual

– 29 –

Removing the keys
<Removing the keys>
To remove the keys, you will need two of the tools described below.
Beforeremovingablackkey,youmustrstremovebothwhitekeysoneithersideoftheblackkey.
Whitekeysmayberemovedwiththesameproceduresasremovingblackkeys.
<Tool>
The tool used in the photos in this section was converted from a gardening ID tag. The size and shape
of an ID tag accord to the dimensions below.
<Note on shaping an ID tag>
The thickness of the tool must be within 1.2~1.3 mm.
Ifthetoolistoothin,removingkeysbecomedifcult.
If the tool is too thick, it may damage the rib of the chassis.
<Tool dimensions>
Width:
15~20 mm
R=2.75 mm
Use this part to
remove the key.
7 mm
Thickness:
within 1.2~1.3 mm

Casio PX-330BK Specifications

General

Brand	Casio
Model	PX-330BK
Category	Electronic Keyboard
Language	English