34
A...Available (Includes cases here parameters are only partially available.)
R...Receive Only
T...Transmit Only
-...Not Available
Note 1...The drawbar parameter involved with the current sound production operation is provided inside Patch
Parameter. To manipulate this parameter individually, manipulate Drawbar Parameter within Patch Parameter.
17.2.7 7...prm : Parameter ID
The Parameter ID field indicates the parameter type. When transferring parameters (see "Part V Parameter List"
below) individually (as opposed to bulk transfer), this field is used to identify the parameter being transferred by
its parameter ID. Any other time, this field is filled with the value 00H.
Category Action(act))
ID (c) Parameter Set IPC IPR BDS BDR HDS HDR Control
00H Command AR---- -
01H Patch AR---- -
02H Tone AR--AR A
03H Timbre ----AR A
04H Drum ----AR A
05H Voice ----AR A
06H Instrument ----AR A
07H Wave Parameter ----AR A
08H Wave Data T---AR A
09HDSP AR--AR A
0AH Song Data A---AR A
0BH Rhythm Pattern T---AR A
0CH Registration ----AR A
0DH Drawbar - (Note 1) --AA A
0EH Reserved ------ -
0FH Reserved ------ -
10HSMF T---AR A
11H Flash Memory Image ----AR A
12H Reserved ------ -
Format: 0pppppppB