— 53 —
[ 10 ] CF-CARD WRITE/READ Test
[Function]
Tests whether writing in /reading CF Card is correctly performed.
Be sure to perform “[9] CF-CARD CLEAR Test” before this test.
After a CF Card is used for this test, the data contained in it and its operation cannot be
guaranteed.
[Operation]
Operation : n 0 1 3 ST
n: Number of times
0 or no value To perform a single test
A value other than 0 (1 ~ 9) Tests repeat infinitely (press ESC to terminate)
[LCD] [PRINT]
CF-CARD n013
CF WR OK
END n013
CF-CARD n013
CF WR OK
END n013
* If the test ends with errors, the line number
and the address are printed instead of OK
message.
[ 11 ] CF-CARD READ ONLY Test
[Function]
Tests whether reading on CF Card is correctly performed.
Be sure to perform “[10] CF-CARD WRITE/READ Test” before this test.
After a CF Card is used for this test, the data contained in it and its operation cannot be
guaranteed.
[Operation]
Operation : n 1 1 3 ST
n: Number of times
0 or no value To perform a single test
A value other than 0 (1 ~ 9) Tests repeat infinitely (press ESC to terminate)
[LCD] [PRINT]
CF-CARD 113
CF RD OK
END 113
CF-CARD 113
CF RD OK
END 113
* If the test ends with errors, the line number
and the address are printed instead of OK
message.
To Next Page
Loading...
Need help?
General
