— 52 —
[ 8 ] FLASH ROM CHECK SUM Test
[Function]
Performs CHECK SUM of FLASH ROM.
This test is exclusively for FLASH ROM for programming.
[Operation]
Operation : n 5 1 2 ST
n: Number of times
0 or no value To perform a single test
A value other than 0 (1 ~ 9) Tests repeat infinitely (press ESC to terminate)
[LCD] [PRINT]
FLASH n512
FLASH CHK SUM OK
END n512
FLASH n512
FLASH CHK SUM OK
END n512
* If the test ends with errors, the line number
and the address are printed instead of OK
message.
[ 9 ] CF-CARD CLEAR Test
[Function]
Tests whether CF card is clears properly.
The data contained and the operation of the CF card used for this test cannot be guaranteed.
[Operation]
Operation : n 2 1 3 ST
n: Number of times
0 or no value To perform a single test
A value other than 0 (1 ~ 9) Tests repeat infinitely (press ESC to terminate)
[LCD] [PRINT]
CF-CARD n213
CF CLR OK
END n213
CF-CARD n213
CF CLR OK
END n213
* If the test ends with errors, the line number
and the address are printed instead of OK
message.