Casio SE-G1 User Manual

E-46
To change taxable statuses of departments
By default, all the departments are set as non taxable. You can
change the statuses by the following operations.
Sample Operation
Setting Depts. 1 through 4 as non-taxable and Depts. 9 through 11 as taxable 1.
Step Operation
1 Press Zk then ~ to set the register in
tax program mode.
Zk~
2 Press corresponding tax status setting key (see
the table below) rst then press Dept. keys
you wish to set. The example on the right is for
setting Depts. 1 through 4 as non-taxable.
asdf
A (Depts. 1 through 4)
3 Depts. 9 through 24 are assigned by combi-
nations of j and Depts. keys. The example
on the right is for setting Depts. 9 through 11
as taxable status 1.
jajsjd
A ( Depts. 9 through 11 )
4 Press k to complete the settings.
k
Taxable status selections
Taxable status 1
A
Taxable status 2
]
Taxable status 3
h
Taxable status 4
u
Non-taxable
Further operations:
• “To set tax tables and rounding system” on page E-44.
Mode Switch
Useful features

Casio SE-G1 Specifications

General

Clerk lock	Yes
Memory type	Flash ROM
Number of users	8 user(s)
Keyboard number of keys	34
Supported paper width	58 mm
Backlight	No
Display digits	8 digits
Display number of lines	1 lines
Second display number of characters	8
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
Power source	AC
Power consumption	100 mA

Weight and Dimensions

Depth	345 mm
Width	326 mm
Height	167 mm
Weight	3500 g