Casio SE-G1 User Manual

E-73
Useful features
When you consider it as a problem
Troubleshooting
Symptom/Problem Most common causes Solutions
E01 appears on the display.
Changing modes without
completing transaction.
Return mode switch to where it
stops buzzing and press p.
E08 appears on the display.
Sign on operation is not
performed.
Prior to starting registration of
any other operation, press Z
~ < and then :.
E10 appears on the display. Printer error
Turn the register off then remove
the paper and turn it on.
No date on receipt.
Paper does not feed enough.
Printer is programmed as a
journal.
Program printer to print receipts.
Drawer opens after ringing once.
Department is programmed as
a single item dept.
Program the dept. as a normal
dept.
Not clearing totals at end of day
after taking report.
Using X mode to print reports. Use Z mode to print reports.
Programming is lost whenever
register is unplugged or at power
failure.
Poor or no batteries.
Put in new batteries and program
again.
Register does not work at all.
Can’t get money out of drawer.
No power. Pull lever underneath the drawer.
Useful features

Casio SE-G1 Specifications

General

Clerk lock	Yes
Memory type	Flash ROM
Number of users	8 user(s)
Keyboard number of keys	34
Supported paper width	58 mm
Backlight	No
Display digits	8 digits
Display number of lines	1 lines
Second display number of characters	8
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
Power source	AC
Power consumption	100 mA

Weight and Dimensions

Depth	345 mm
Width	326 mm
Height	167 mm
Weight	3500 g