Casio SE-G1 User Manual

E-72
To set calculator functions
This program sets functions in CAL mode such as opening drawer
when
p key is pressed, or print number of calculations on X or
Z report etc.
Step Operation
1 Enter C then press k key to set the
register in the program mode.
Ck
2 Enter “1022” then press k. “1022” is the
program code for calculator settings.
Z?XXk
3 Choose a function number from the table
shown below. Enter the number then press
p key.
Zp
(A)
4 Press k key to complete the program.
k
Selections
Open drawer whenever p is pressed.
Open drawer whenever
is pressed.
Print number of calculations on X or Z reports
Yes
No
No
?
A
Yes
Z
Yes
No
X
Yes
C
No
No
No
V
Yes
B
Yes
No
N
Yes
M
Mode Switch
Useful features

Casio SE-G1 Specifications

General

Clerk lock	Yes
Memory type	Flash ROM
Number of users	8 user(s)
Keyboard number of keys	34
Supported paper width	58 mm
Backlight	No
Display digits	8 digits
Display number of lines	1 lines
Second display number of characters	8
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
Power source	AC
Power consumption	100 mA

Weight and Dimensions

Depth	345 mm
Width	326 mm
Height	167 mm
Weight	3500 g