Casio SE-G1 User Manual

E-63
Useful features
To assign a cashier
If cashier assignment system is programmed, you can obtain sales
data of each cashier on X or Z reports. Up to eight cashiers can
be assigned. When the mode switch is turned OFF, the assigned
cashier’s ID number will be cleared. See “To set general controls” on
page E-37 for programming cashier assignment system.
Step Operation
1 In any Mode switch other than PGM, CAL or
OFF, sign on by entering cashier’s ID number
then press :.
Z ~ <:
2 Perform regular operations.
3 When the cashier signs off, enter “0” then
press :.
?:
Mode Switch
Useful features

Casio SE-G1 Specifications

General

Clerk lock	Yes
Memory type	Flash ROM
Number of users	8 user(s)
Keyboard number of keys	34
Supported paper width	58 mm
Backlight	No
Display digits	8 digits
Display number of lines	1 lines
Second display number of characters	8
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
Power source	AC
Power consumption	100 mA

Weight and Dimensions

Depth	345 mm
Width	326 mm
Height	167 mm
Weight	3500 g