Casio TE-2200 User Manual

Basic Operations and Setups
30
E
Assigning a clerk
Clerk or cashier assignment can be performed using clerk secret numbers only (clerk
buttons are not equipped).
Clerk secret number key
When the cash register is programmed to use clerk secret numbers for clerk or cashier assignment, the clerk
buttons are not functional.
Clerk sign on
OPERATION RECEIPT
Signing clerk 1 on:
1 6 o
Signing clerk 2 on: 2 6 o
○○○
Signing clerk 15 on: 15 6 o
• If you do not want the clerk secret number to be shown on the display, press o before entering the number.
Clerk sign off
OPERATION
Signing clerk off:
0 6 o
(except PGM mode)
•The current clerk is also signed off whenever you set the mode switch to OFF position.
Important!
• The error code “E008” appears on the display whenever you try to perform a registration, a read/
reset operation without signing on.
•A clerk cannot sign on unless other clerk is signed off.
• The signed on clerk is also identified on the receipt/journal.
Clerk secret number
(1 ~ 15 is set as default.)
Mode switch
ALL
— Clerk name/machine No./consecutive No.
* COMMERCIAL MESSAGE *
REG 03-06-2006 11:58
C 01 MC#01 000123
1 DEPT01 T1 $1.00
www.cashregisters.net

Casio TE-2200 Specifications

General

Types of payment	Cash
Supported paper width	58 mm
Display digits	10 digits
Second display	Yes
Second display type	LED
Display number of characters	16
Power source	AC
AC input voltage	120-230 V
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 85 %

Weight and Dimensions

Depth	450 mm
Width	400 mm
Height	277 mm
Weight	12000 g