108
E
User Maintenance and Options
REG2 X1
REG1 Z1
OFF X2/Z2
RF
PGM
Step 2
Press | to feed about 20
cm of paper.
Step 3
Cut the journal paper at the
point where nothing is
printed.
Step 4
Remove the journal take-up
reel from its holder.
Step 5
Remove the paper guide from
the take-up reel.
Step 6
Slide the printed journal from
the take-up reel.
Step 7
Open the platen arm.
Step 8
Remove the old paper roll
from the cash register.
Step 9
Load new paper.
Go to the step 3 described on
page 13 of this manual.
Step 1
Set the mode switch to the
REG position and remove the
printer cover.
To replace journal paper
To Next Page
Loading...
