Report Order Assigns a key for specifying reporting order. You can
assign a code or an item of report.
00: Ascending order of report type
01: Descending order of report type
02: Ascending order of reporting item 1
03: Descending order of reporting item 1
04: Ascending order of reporting item 2
05: Descending order of reporting item 2
06: Ascending order of reporting item 3
07: Descending order of reporting item 3
08: Ascending order of reporting item 4
09: Descending order of reporting item 4
10: Ascending order of reporting item 5
11: Descending order of reporting item 5
12: Ascending order of reporting item 6
13: Descending order of reporting item 6
Report Class Reporting items are outputted by assigned classification. In
accordance with report type, the classification differs. (*2)
00: No specification
01: Item
02: Item department
03: Item group
04: Item classification code
05: Selective item type
06: Time zone
07: (Reserved)
08: Unit price table
Report Class Start Start code of objective classification for outputting
classified report. You can input up to 16-digit code. No
need to set value if all the records are reported.
Report Class End End code of objective classification for outputting classified
report. You can input up to 16-digit code. No need to set
value if all the records are reported.
58mm Form Code Print layout XML for printing analysis report by 58 mm width
printer. Normally, use REP_USERDEF_58.
80mm Form Code Print layout XML for printing analysis report by 80 mm width
printer. Normally, use REP_USERDEF_80.
Report Type Maximum Assigns number of records to be reported. Assign 000000 if
all the records should be outputted.
87
To Next Page
Loading...
