To reset the high altitude value displayed by the “Altitude”
and “Combination” watch faces
1.
Use the
procedure under “To change the watch face” to
change the watch face to “Altitude” or “Combination”.
2.
Hold your finger on the touch screen for about two
seconds. When D appears, tap it.
●
Performing the
step below will reset the high altitude value (shared by
the “Altitude” and “Combination” watch faces) stored in watch memory.
To cancel this procedure at this point without resetting the value, press
the power button.
3.
Tap “MAX Altitude Reset”
.
●
Note that
resetting does not change the setting to 0 meters. It changes
high altitude value to the highest altitude attained over the past 24
hours.
EN-41
To Next Page
Loading...
