Screen while Measurement is in Progress
Climbing, trekking
A
Difference in altitude between the current reading and the reading 60
minutes before. If the current measurement was started less than 60
minutes ago, this value shows an approximate 60-minute value
calculated based on the current reading and the first reading.
B
Current time.
C
Input target altitude.
D
Difference between target altitude and current altitude.
Rmng: Current altitude is less than target.
–: Current altitude is greater than target.
E
Time elapsed from start of measurement.
Note
●
To correct the current altitude used for A
and
D above, use the altimeter
function included in the watch’s TOOL app. For information about the
correction operation, refer to “To perform altitude reading calibration
manually”.
●
The altitude difference A is
based
on barometric pressure measurements
that are calculated to altitude values. Barometric pressure values and their
calculated altitude values can be affected by weather conditions.
EN-79
To Next Page
Loading...
Need help?
General
